SuperCID (courtesy of www.spv-developers.com)

You need an alive Internet connection from the computer. Your smartphone must be application unlocked and activesynced with the computer.

• Download the last version of SPV-Service client from here.
• Extract all the files from archive to some folder on the PC and run SPVServices.exe (press OK on the phone when it ask to install TyphoonNBFTools.dll).
• Click 'CID Tool (Alpha)' on the left and press [Set CID = 11111111] on the right. Wait untill it's done.

SPL 1.01.0109

Your smartphone must be activesynced with the computer.

• Download IU_SPL+PatchedRUU.zip from here.
• Extract all the files to some folder on the PC and run Patched_RUU.exe.
• Follow the instructions and it will flash SPL 1.01.0109 to your phone.

WM5

• Download proper .zip file from Downloads.
• Unzip wm5xxxxx.bin file from archive to C:\ and rename it to wm5.bin.
• Disable USB connections in ActiveSync Connection Settings.
• Turn off the phone and disconnect USB.
• Press Camera button and holding it insert USB connector (or holding Camera button press Power button for 1-2 seconds).
• When "Need an UI (0)?" appears on the screen press [0] immediately. You will see tricolor screen, in the blue zone there will be "Typhoon IU" message, if you see "Typhoon XIP" you were late to press [0], start from beginning.
• Run mtty1.42.exe from archive, choose [USB], press Enter and you will see a prompt.
• Type "l c:\wm5.bin" without quotes and press Enter.
• Wait untill the phone flashed and the prompt appeared again, type "ResetDevice" and press Enter to restart the phone or just turn the phone off and on.